Roozbeh's Bombs (unsafe & easy)!

(2) REAL Cherry Bomb Powder
4 parts by weight of potassium perchlorate
 1 part by weight of antimony trisulfide
 1 part by weight aluminum powder
 

(3)  Relatively safe
a) 3 parts by weight of potassium permanganate
b) 2 parts by weight aluminum powder
 

(4)*VERY* Shock/Friction/Static/Heat Sensitive
Use only if suicidal or desperate.
 4 parts by weight of potassium chlorate
 1 part by weight of sulfur
 1 part by weight of aluminum powder

*NOTE*To use these mixtures, SEPARATELY pulverize each ingredient into a
fine powder, the finer it is, the more power you get. Use a mortar and
pestle if available, and grind GENTLY. Do not use plastic as this can
build a static charge. Remember, do them SEPARATELY.
 
 

( 5) Ammonium Triiodide)
WARNING: This explosive is EXTREMELY shock sensitive when dry, and
moderately sensitive when wet!!! AVOID IT when dry DO NOT store!
The purplish iodine vapor this produces during the explosion will stain
and corrode!

a) Take a small plastic bucket, add 3-4 inches of household ammonia. Try
to get clear (non-pine, non-cloudy) ammonia. Or use an ammonium
hydroxide solution from a chemlab. This results in better but more
sensitive, and therefore dangerous crystals.
b) Drop in iodine (like you use on scratches) one drop at a time, or,
 preferably, use crystals of iodine.
c) Let it settle, then pour it through a piece of cloth, discarding
 the runoff.
d) Squeeze *gently* to get out excess liquid.
e) Mold it onto the thing you want to blow up, stand **way** back.
f) Wait for it to dry, and throw a rock at it.
 

(6) NITROCELLULOSE
 Materials: cotton, concentrated nitric acid, concentrated sul
 acid, distilled water

 Equipment : two  200-300mL beakers, funnel, filter paper, blue
 litmus paper

 a). Pour 10mL of sulfuric acid into beaker.
 b). Pour 10mL of nitric acid into beaker with sulfuric acid.
 c). Immediately add 0.5 gram of cotton.
 d). Allow it to soak for EXACTLY 3 minutes.
 e). Remove the nitrocellulose.
 f). Put the nitrocellulose into a beaker of distilled water to wash it
in.
 7. Allow the material to dry.
 8. Re-wash it.
 9. Once neutral ( acid/base) it can be dried and stored
 

(7)THERMITE
 Thermite is a powder which burns incredibly hot (approx. 2200 c)
and can be used to burn through almost anything.

Materials: powdered aluminum, powdered iron oxide

 a).  mix the two powders together as evenly as possible

 Igniting thermite is difficult, to ignite:
i)  add some potassium chlorate and ignite with a few drops of sulfuric
acid
ii)  magnesium strip can be used as a fuse
 

(8)  GUN-POWDER
A). POTASSIUM NITRATE (POWDER)  70%
B). CARBON OR COAL (POWDER)   25%
C). SULFUR (POWDER)    5%

(9) HYDROGEN BOMB:-  COME BACK AFTER A FEW YEARS!!!!!